Welcome to our Canatek Web Store where you may purchase our complete line of energy
monitoring products securely on line. We invite you to review the Energy Monitoring
Systems tab of our products page for further information.

Should you have any questions, were always pleased to provide assistance. Simply call
us toll free at 1-855-351-0144 Monday to Friday 9 am to 5 PM EST or send us an e mail at
sales@canatekinc.com 24 hours a day.

Residential (Single Phase) Energy Monitoring Systems

Canatek CHEM1 Wired Home Electricity Monitor

The Canatek CHEM1 is the ideal low cost solution where there is access to a LAN router port in close proximity to the where the utility distribution panel is located in your home. This kit includes a single module gateway, two split core 200 ampere sensors, a plug in ac  power adapter, a local area network cable, and an installation accessory kit.

$159.00

Canatek CHWEM1 Wireless Home Electricity Monitor

The Canatek CHWEM1 is the perfect wireless solution where your home service panel and router are located in different areas of your home. This kit includes a wireless gateway, a transmitter module, two split core 200 ampere sensors, two plug in ac power adaptors, a local area network cable, and an installation accessory kit.

$249.00

Business/Commercial (Three Phase) Energy Monitoring Systems

Canatek CBEM1 Wired Business Electricity Monitor

The Canatek CBEM1 is the ideal business solution where there is access to a LAN router port in close proximity to the where the commercial service panel is located. This kit includes a single module gateway, three split core 200 ampere sensors, a plug in ac power adaptor, a local area network cable, and an installation accessory kit. For installations greater than 200 Amperes please choose our CBEM1-SUB and the accessory sensors which meet your requirements.

$375.00

Canatek CBWEM1 Wireless Business Electricity Monitor

The Canatek CBWEM1 is the perfect solution where the installed utility service panel and the router for the business are located in different areas of the building. This kit includes a wireless gateway module, a transmitter, three split core 200 ampere sensors, two plug in ac power adaptors, a local area network cable, and an installation accessory kit. This kit may be expanded to wirelessly measure individual loads throughout any facility up to 3000 amperes per load at 600 volts AC.

$399.00

Expansion Transmitter Kits with 200 Ampere Sensors*

These Canatek wireless expansion transmitter systems communicate with any Canatek wireless gateway. They are available with provision for one, two or three sensors. Each expansion kit comes with the transmitter, 200 ampere split core sensor(s), a plug in ac adaptor, and an  installation accessory kit. Whether you are building a large commercial system monitoring hundreds of loads or just want to measure some individual loads at your home these kits are the perfect solution.

Canatek CBWXS3 Transmitter Expansion Kit

This 3 port expansion kit allows you to monitor an additional 3 phase non synchronous load, or a variety of other single or 3 phase loads. Comes complete with a wireless transmitter, a plug in ac wall adaptor, three 200 ampere split core CT ’s, and an installation accessory kit.

$235.00

Canatek CBWXS2 Transmitter Expansion Kit

This 2 port expansion kit allows you to monitor up to 2 additional loads in either a single or three phase utility environment. Please call us if you have any questions about your application. Comes complete with a wireless transmitter, a plug in ac wall adaptor, two 200 ampere split core CT ’s, and an installation accessory kit.

$175.00

Canatek CBWXS1 Transmitter Expansion Kit

This single port expansion kit allows you to monitor an additional load in either a single or three phase utility environment. Please call us if you have any questions about your application. Comes complete with a wireless transmitter, a plug in ac wall adaptor, one 200 ampere split core CT and an installation accessory kit.

$125.00

Commercial Energy Monitoring Systems Without Sensors*

* The purchase of our Canatek energy monitoring systems without sensors is the ideal choice when you need sensors of a different capacity than those included in our pre packaged systems. Simply choose the wired or wireless system which suits your needs then select the number and amperage capacity required for your sensors. All of our sensors have a split core which means that you do not have to make or break any connection to install the sensor. You merely open the insulated sensor, place it around the insulated conductor, and close the sensor shut.

Canatek CBEM1-SUB Wired Business Electricity Monitor

The Canatek CBEM1-SUB is the ideal business solution where there is access to a LAN router port in close proximity to the where the commercial service panel is located. This system is intended for use with sensors (purchased separately) which meet your specific requirements. We stock sensors for systems up to 3,000 amperes and may provide sensors up to 5,000 amperes on special order. This system includes a commercial (3 sensor ready) gateway, a plug in ac power adaptor, a LAN cable, and an installation accessory kit.

$335.00

Canatek CBWEM1-SUB Wireless Business Electricity Monitor

The Canatek CBWEM1-SUB is the perfect solution where the installed utility service panel and the router for the business are located in different areas of the building. This system is intended for use with sensors (purchased separately) which meet your specific requirements. We stock sensors for systems up to 3,000 amperes and may provide sensors up to 5,000 amperes on special order. This system includes a commercial wireless gateway, a (3 sensor ready) transmitter, two plug in ac power adapters, a LAN cable, and an installation accessory kit.

$399.00

CBWXS1-SUB
(One Port)

$111.00

CBWXS2-SUB
(Two Port)

$149.00

CBWXS3-SUB
(Three Port)

$199.00

Canatek Expansion Transmitters
Without Sensors

These Canatek wireless expansion transmitter systems communicate with any Canatek wireless gateway. They are available for use with one, two or three sensors of your choice which are purchased separately. Each expansion kit comes with the transmitter, a plug in ac adaptor, and an installation accessory kit. Simply select the sensors you require which best suit your requirements.

Individual Split Core Current Sensors

Our Canatek split core current sensors function with any of our energy monitoring systems. You may also have different capacity sensors plugged into the same transmitter or gateway. All of our sensors have a split core which means that you do not have to make or break any connection to install the sensor. You merely open the insulated sensor, place it around the insulated conductor, and close the sensor shut. Our most popular sensors are shown below. Should you require smaller or larger capacity sensors please feel free to contact us to discuss your needs.

200A sensor (single)
1” x 1” i.d., split-core

EM-S200A

$25.00

400A sensor (single)
1.25” x 1.25” i.d., split-core

EM-S400A

$81.00

600A sensor (single)
1.25” x 1.25” i.d., split-core

EM-S600A

$95.00

800A sensor (single)
2.0” x 2.0” i.d., split-core

EM-S800A

$105.00

1200A sensor (single)
2.0” x 2.0” i.d., split-core

EM-S1200A

$119.00

2000A sensor (single)
5.0” x 3.0” i.d., split-core

EM-S2000A

$145.00

3000A sensor (single)
5.0” x 3.0” i.d., split-core

EM-S3000A

$155.00

*Split core sensors my not be exactly as illustrated